Home / Products / TPMS / Truck Bus TPMS / BUS TPMS / 6 wheel Bus Internal Tpms

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

6 wheel Bus Internal Tpms

This is a tpms for 6-wheel bus tpms, sensor will be fixed in Rim by bandage and measure tire pressure and temperature, then send RF to Monitor and repeater at the same time, then Monitor will display tire pressure and temperature one by one, and will give alarm once any tire is low/high pressure and temperature . Monitor will sure 1 to 18 wheel truck or trailer, and includes rs232 port or can-bus port that you want to connect with another device. 
  • TD20-6

  • Tiremagic

Monitor voltage:
Max current:
Support:
battery:
used:
Availability:
Quantity:

Embedded tpms monitor install in bus, 1.8-inch screen, support 1 to 18 wheel bus truck with 8v1/12v1 valve. Can use internal or external sensor. Monitor support RS232 port or CAN-BUS port

Bandage internal sensor includes 1.68M bandage and CR2450 battery, battery life is more than 5 years or 200kKM.

External sensor have CR2050 Battery and CR1632 battery, CR2050 battery life is more than 5 years or 200kKM, CR1632 battery life is 24months only, but it can be replaced by yourself. The chip of sensor are NXP from United States. 

Repeater can install under the bus or truck by screw, only give DC24V power enough, and his waterproof of shell is IP67 if you select better power cable.

TD20 AA

产品示意图

TD20-for-BUS_01

TD20-for-BUS_05

TD20-for-BUS_09

TD20-for-BUS_08

TD20 installation 1

t04T04 Installation

ada中继器配件internal install pic


Previous: 
Next: